QUICK DRY GLUE FOR CORK

Quick dry glue especially for use in the glueing of cork parquet as well as sheets of decorative cork for walls.
It is especially for use by people with limited experience in using quick dry adhesives.

          - Doesn't leave yellow stains. Remains completely transparent.
          - When it is damp it can be easily cleaned with water.
          - Doesn't release volatile toxic substances or give off odours.
          - Can be applied with a simple roller. 
          - Relatively short application and drying time

To apply it, mix the glue thoroughly and using a roller apply a uniform layer of glue over the cork, making sure that air bubbles don't form.
Perform the same task on the wall or the surface where the cork is going to be applied.
The two surfaces should have a uniform and homogenous layer of glue. You should wait for the glue to dry. You will know when it is dry as a continuous, transparent and glossy film forms on the surface of the material.  

Once dry and transparent on both sides, position the sheets of cork without applying pressure, so that, if they are positioned incorrectly you can remove and reposition them.
Once they are positioned correctly, using a piece of wood and a hammer tap lightly all over the cork to ensure that both surfaces stick together.